Home > Contact & Support > Support Information & Download > Blu-ray Disc Player XV-BP1 Updater

Blu-ray Disc Player XV-BP1 Updater

XV-BP1 Firmware Ver. 7.202
Released on: April 16 2012

File description

This file is for JVC Blu-ray Disc Player XV-BP1 firmware Ver. 7.202.
NOTICE:
Exclusively for XV-BP1(except Japan model). Do not use for other models as it may cause malfunction.
For XV-BP1(Japan model), please refer XV-BP1 Firmware update(Japanese).

For download, please enable 'JavaScript' on your web browser.


Improvement

Ver. 7.202
  • Playability and Stability. (April 16.2012)
Ver. 7.169
  • Playability and Stability. (April 5.2010)
Ver. 7.167
  • Playability and Stability. (March 5.2010)
Ver. 7.154
  • Playability and Stability. (November 13.2009)


Update procedures

This update is performed via USB Flash Drive


Creating the Firmware Update Device

Read the software agreement carefully and download the file only if you agree with the contents.

(1) Download the latest version of the XV-BP1 firmware and save it to your PC Desktop.
image

(2) Insert a USB Flash into your PC.
Note: This flash drive must be formatted to FAT16 or FAT32 and must have at least 50MB of free space.

(3) Open the Downloaded zip file. Copy the file JVC_BD_310M.ROM from the zip folder.

(4) Paste the file JVC_BD_310M.ROM to USB Drive folder. (Do not paste the License_J_E.txt.)
image

(5) Remove the USB Drive from the PC, it is now ready to update the XV-BP1.


Updating Firmware

(6) Turn on the XV-BP1 and wait until the Home Menu appears.
image

(7) Insert USB flash drive in a USB port on the front panel of the XV-BP1.
image

(8) The UPDATE window appears; it will display the versions of the current firmware in white, and the versions saved in the USB memory device.
Note: If update window doesn't appear, try using another USB drive, or go back to step 3 - 4 and try un-zipping file instead of copying the file directly from the zipped folder.
image

(9) Press ENTER on the remote control or press PLAY on the player to start the update. - A status bar shows the progress of the firmware update. - Updating Main Software will take about 2 - 3 minutes. - Please be patient during the update and do not touch any buttons on the player or remote control.
image

(10) When the update is completed, the message, "Update is complete" will appear, and the power will turn off automatically after 5 seconds.
image

(11) The update is complete, remove the USB flash drive from the XV-BP1 and turn it back to on.


File download

Read the software agreement carefully and download the file only if you agree with the contents.


Download of Software for Blu-ray Disc Player

Important:

This End-User License Agreement ("Agreement") is regarding the software ("Software") to update the firmware of the Blu-ray Disc Player, Model No. XV-BP1 ("Product"). Please carefully read this Agreement before downloading the Software. The right to download and use the Software is granted by JVCKENWOOD Corporation ("JKC") to end-user ("You") only on the condition that You agree to the following Agreement. If You do not agree to the terms of the Agreement, you may not download or use the Software any more. HOWEVER, DOWNLOADING THE SOFTWARE SHALL BE DEEMED AS YOUR ACCEPTANCE OF TERMS AND CONDITIONS OF THIS AGREEMENT.




For download, please agree to the 'END-USER LICENSE AGREEMENT' by checking the below check box and click DOWNLOAD.

DOWNLOAD

xv-bp1_update_v7202.zip(26,840,280 bytes)



[issued:Apr.16,2012]